Major Highlights
- First Nation company, Black Diamond Drilling, mobilizes drill rig to Case Lake
- Drilling set to commence with 2,000 meters of diamond drilling
- High-grade and overlimit samples to be reported from Phase II drilling
VANCOUVER, BRITISH COLUMBIA – November 13, 2024 – Power Metals Corp (“Power Metals” or the “Company”) (TSX VENTURE: PWM) (FRANKFURT: OAA1) (OTCQB: PWRMF)is pleased to announce that it has mobilized a diamond drill rig from Black Diamond Drilling to commence its 2024 Phase III drill program (the “Program”) at its 100% owned Case Lake Property (the “Property”) in northeastern Ontario (Figure 1). The Company anticipates completing a total of 2,000 meters of exploration drilling to target high-grade cesium in pollucite, tantalum and lithium at West Joe and Main Zone.
The Company previously intercepted high-grade cesium and tantalum in Phase I (reported June 18, 2024) and will continue releasing results from Phase II over the next four weeks. Several overlimit samples have been submitted to SGS Labs for further analysis, with final results expected this month – reinforcing Power Metals confidence in the resource potential at Case Lake.
Figure 1 – Image of Black Diamond drill equipment on the ground at Case Lake, Ontario, Canada
Johnathan More, Chairman and Founder of Power Metals commented:
“We are still waiting on several assay results from our completed Phase II drill program. It has been confirmed by the lab (SGS) that they are overlimit samples, meaning these high-grade cesium assays must be retested to confirm. This has created a delay, however it gives us full confidence to restart the drill rig and commence Phase III drilling.”
Haydn Daxter, CEO of Power Metals, added:
“The Company is pleased to welcome the Black Diamond drill rig on site for our 2024 Phase III Program at Case Lake. Partnering with Black Diamond Drilling, a First Nations-owned company, is a vital part of our broader ESG strategy and commitment to local community engagement. We expect drilling to commence in the coming days, with a targeted completion by mid-December. Phase III is poised to build on the high-grade results achieved in Phase II, further validating the resource potential at West Joe.”
-ENDS-
Case Lake Property
The Case Lake Property is located 80 km east of Cochrane, northeastern Ontario close to the Ontario - Quebec border. The Property consists of 585 cell claims in Steele, Case, Scapa, Pliny, Abbotsford and Challies townships, Larder Lake Mining Division. The Property is 10km by 9.5km in size with 14 granitic domes. The Case Lake pegmatite swarm consists of six spodumene dykes known as the North, Main, South, East and Northeast dykes on the Henry Dome, and the West Joe dyke on a new dome, collectively forming mineralization trend that extends for approximately 10km (Figure 4).
Power Metals have completed several exploration campaigns that have led to the discovery and expansion of new and historic spodumene bearing LCT pegmatites at Case Lake. The Company has drilled a total of 22,231 meters of core between 2017 and 2024 at the Property. The Case Lake Property is owned 100% by Power Metals Corp. A National Instrument 43-101 Technical Report has been prepared on Case Lake Property and filed on July 18, 2017 (Figure 2).
Pelletier Property
The Pelletier Property is located 50km south of Hearst, northeastern Ontario close to a network of forestry roads. The Property consists of 337 mineral claims that account for a total of 7000 hectares in Franz, Roche, Scholfield, and Talbot townships in the Porcupine mining division. The Pelletier Project is characterized by LCT prospective S-type pegmatitic granites intruding into metasedimentary and amphibolite of the Quetico at or near Archean terrane boundary between the Quetico and Wawa sub-provinces (Figure 2).
Decelles Property
The Decelles Property contains 669 claims, covering 38,404 hectares of LCT prospective ground near the mining centers of Val-dÓr and Rouyn-Noranda, approximately 600km from Montreal. Power Metals acquired the Decelles and Mazerac properties from Winsome Resources in 2023 in a deal that allowed Winsome to increase its stake to 19.59% (Refer to press release announced on August 24, 2023). The geology of Decelles property is part of the Archean Pontiac sub-province where S-type LCT prospective, pegmatite bearing, granitic Decelles Batholith intrudes into metasedimentary units of the Pontiac Group. Spodumene and Beryl bearing pegmatites have been reported historically within the Pontiac sub-province in association with S-type garnet-muscovite granite. The Decelles property is adjacent to Vision Lithium’s Cadillac property where discovery of high-grade lithium pegmatites was reported in 2022 (Figure 2).
Mazerac Property
The Mazerac Property is located approximately 30 km east of Power Metals’ Decelles property near well-established mining camps in the Abitibi region of Canada and is accessible by network of mining-grade forestry roads. The Mazerac property contains 259 claims that cover 14,700 hectares of LCT prospective ground near the mining center of Val-dÓr and Rouyn-Noranda. The regional geology of Mazerac is similar to Decelles where S-type LCT prospective, pegmatite bearing, granites of Decelles Batholith intrude into metasedimentary units of the Pontiac Group. Spodumene and Beryl bearing pegmatites have been reported historically within the Pontiac sub-province in association with S-type garnet-muscovite granite (Figure 2).
Figure 2 – Power Metals Corp Project Locations Map in Ontario and Quebec Canada
Pollucite and Cesium
Pollucite is a rare mineral that hosts high grade cesium and is associated with highly fractionated, rare element pegmatites. The main source of cesium known globally is pollucite (Cs,Na)₂(Al₂Si₄O₁₂)·2H₂O, (https://www.gov.mb.ca/iem/geo/industrial/pollucite.html). Currently the Tanco mine in Manitoba, Canada is the only operating cesium deposit and holds over 60% of the known reserves globally.
Scientific and Technical Disclosure
The scientific and technical disclosure included in this news release has been reviewed and approved by Amanuel Bein, P.Geo., Vice President of Exploration for Power Metals, a Qualified Person under National Instrument 43-101 Standards of Disclosure of Mineral Projects.
Power Metals
Power Metals Corp. is a diversified Canadian mining company with a mandate to explore, develop and acquire high quality mining projects. We are committed to building an arsenal of projects in both lithium and high-growth specialty metals and minerals. We see an unprecedented opportunity to supply the tremendous growth of the lithium battery and clean-technology industries. Learn more at www.powermetalscorp.com.
ON BEHALF OF THE BOARD
Johnathan More, Chairman & Director
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the content of this news release.
No securities regulatory authority has either approved or disapproved of the contents of this news release. The securities being offered have not been, and will not be, registered under the United States Securities Act of 1933, as amended (the “U.S. Securities Act”), or any state securities laws, and may not be offered or sold in the United States, or to, or for the account or benefit of, a “U.S. person” (as defined in Regulation S of the U.S. Securities Act) unless pursuant to an exemption therefrom. This press release is for information purposes only and does not constitute an offer to sell or a solicitation of an offer to buy any securities of the Company in any jurisdiction.
Power Metals Corp.
Johnathan More
515-401-7479
info@powermetalscorp.com
Cautionary Note Regarding Forward-Looking Information
This press release contains forward-looking information based on current expectations, including the use of funds raised under the Offering. These statements should not be read as guarantees of future performance or results. Such statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to be materially different from those implied by such statements. Although such statements are based on management’s reasonable assumptions, Power Metals assumes no responsibility to update or revise forward-looking information to reflect new events or circumstances unless required by law.
Although the Company believes that the expectations and assumptions on which the forward-looking statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the Company can give no assurance that they will prove to be correct. Since forward-looking statements address future events and conditions, by their very nature they involve inherent risks and uncertainties. These statements speak only as of the date of this press release. Actual results could differ materially from those currently anticipated due to several factors and risks including various risk factors discussed in the Company’s disclosure documents which can be found under the Company’s profile onwww.sedar.com.
This press release contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as amended and such forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The TSXV has neither reviewed nor approved the contents of this press release.
